Send Message
Home ProductsWalk In Coldroom

Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom

Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom

Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom
Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom
Product Details:
Place of Origin: China
Brand Name: Oasis brand
Certification: GB/T 19001-2006/ISO9001:2015
Model Number: -24℃
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: negotiate
Packaging Details: carton
Delivery Time: 5-6 weeks
Payment Terms: T/T
Supply Ability: 100 set per week
Contact Now
Detailed Product Description
Material: Stainless Steel Steel Thickness: 0.6, 0.8mm,1.0mm Etc
Panel Thickness: 100mm,150mm Function: Cooling
Door Type: Sliding And Hinged Door Density: 42KG/M3
Dimension: Customized Power: 220,380V/50Hz/60Hz
Temperature: Customized Condition: New
High Light:

Prefabricated Walk In Coldroom


380V Walk In Coldroom


Bakery Walk In Freezer Room

Prefabricated Walk In Bakery Freezer Room


Oasis Chiller and freezer roooms customized,  made of different materials, can be used for food storage, cooling and processing.


We can design according to your request.


*  Pre-fabricated wall floor and ceiling insulation panels.

*  Ceiling support structure where required.
*  Doors complete with all door furnishings.
*  Lighting fittings and switches.
*  Temperature alarm system.
*  Digital and dial thermometers.
*  Pressure relief vents.
*  Coil supports.
*  Utility penetrations.
*  Escutcheon plates and finish trims.
*  All electrical works complete with panels.


Insulation panels spec:


*   40Kg/M³ foamed-in-place polyurethane chemically bonded to interior and exterior metal surfaces.
*  Wall thickness is a full four inches with a closed cell rating of not less than 97%.
*  The thermal conductivity ("K") factor is not  exceed 0.117 BTU per hour/foot square/Fº/inch.
*  Overall coefficient of heat transfer  ("U") factor is not exceed 0.029 with a resulting "R" value of 34, where R is the
total thermal resistance of the wall section.
* The insulation remains stable at an operating temperature range of minus 40ºC to plus 120ºC.




1. Materials - Coldroom panels materials can be stainless steel,colorbond,aluminum,galvanized,salt steel etc.


Detail Standard Face plate According to GB/T23932-2009 double skin metal faced insulating panels for builing
According to JB/T6527-2006 The sandwich panels use for prefab cold room
Metal steel face plate (exterior +interior) Metal steel plate thickness PU Thickness (mm)
50 75 100 120 150 200
Colorbond steel + Colorbond steel 0.4-0.8
Salinized steel + Salinized steel 0.4-1.0
Stainless steel +Stainless steel 0.5-2.0
Aluminum steel + Aluminum steel 0.4-2.0
Colorbond steel + Stainless steel Customized
Colorbond steel + Salinized steel Customized
Colorbond steel + Galvanized steel Customized
Colorbond steel + Aluminum steel Customized
Bare PU panel  
Customized Customized



2. Coldroom structure:  Walk in Cold room set combined piece by piece according to drawings. Each panel fabricated with camlock, with tongue-and - groove joint, easy to install by clients themself.



Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom 0


3. Panel Thickness :  Panel thickness and working temperature based on ambient temperature 35℃

You can choose thickness according to temperature rrequest.


Panel Thickness MM 50 75 100 125 150 200
Heat Conductivity W(M.K) 0.27 0.24 0.18 0.17 0.16 0.14
Working Temperature ≥5℃ ≥-5℃ ≥-25℃ ≥-30℃ ≥-35℃ ≥-45℃
Limiting Temperature ≥-5℃ ≥-10℃ ≥-30℃ ≥-35℃ ≥-40℃ ≥-50℃



4. Corner type:  Generally, right angle corner is common used for coldroom panels. But  we can also design curved corner if needed.It is environmental protection, beautiful and easy to clean.   


5. Floor type,  This deep freezer cold room is walk in type floor. Moreover, we have recessed type for your choice. Recessed type can backfill concrete on floor panel, to enhance hardness to allow forklift drive inside.


6.  Door type:  This deep freezer cold room showed above have sliding door and hinged door for your referance. One door for one room or two doors as your choice. 

Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom 1


7.  Application:  We can supply high temperature (chiller) coldroom, low temperature (Freezer) coldroom and blast freezer as your request.


Such as Beverage Chiller, Meat Chiller, Seafood Chiller, Vegetable Chiller,Fruit Chiller,Wast Chiller, Meat Freezer, Seafood Freezer,General Freezer,Kitchen Freezer,Kit Freezer. You can take below as referance.


Storage products Storage temperature approach
Vegetables, Fruit storage, Dry food -5~5degree centigrade
Drink, Beer storage, Beverage 2~8 degree centigrade
Meat, Fish, Seafood freeze storage -18~--25 degree centigrade
Medicine storage 2~8 degree centigrade
Medicine freeze storage -25 degree centigrade
Meat, Fish blast freezer -35~-40 degree centigrade



8. Refrigeration systems : 


We supply all kinds of refrigeration system to match different temperature coldroom.


brand air-cooled / water-cooled system,

Emerson Copeland air-cooled / water-cooled system,

Tecumseh air-cooled / water-cooled system.

Our own brand Coldmach full set intelligent refrigeration system.

And we can customize refrigeration system

  Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom 2


9. Cooperative partner:


The walk in cold rooms, freezer and chiller rooms and blast freezer rooms can be used for hotel,gastronomy, food production, staff restaurant, hospitals, cold chain logistics, ship ect. We cooperated with many company, like Marriott,Hyatt,Hilton,Renaissance Marriott,Courtyard,Crowne Plaza, Internaltion Hotels Group, Sofitel,Sheraton,,Wanda Group etc.



Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom 3




10. We can supply certificate documents as follows:


- QS Industrial production license

- CE Certificate (Coldroom panel & door)

- B1 (GB/T 8624) Fire inspection report

- B2 (GB/T 8624) Fire inspection report

- SGS test report (single material)

- SGS test report (composite material)


11. Coldroom inquiry:


Let us know coldroom dimension, storage what kind of food, temperature, door type, panel materials, and refrigeration system type. Then we can make a firm offer ASAP.


Cold room size

(L x W x H)

Food &Temperature Door type Cold room material Refrigeration system type
2x2x2.6m Fruit, +2C degree Hinged door 0.6mm stainless steel Air-cooled
4x3x2.7m Frozen meat, -24C degree Sliding door 0.6mm colorbond Air-cooled
5x3x2.7m Seafood, -24C degree Sliding door 0.8mm aluminum Water-cooled
5x6x2.8m beverage, +2C degree Hinged door 0.7mm galvanized sheet Air-cooled



Customized Bakery Walk In Freezer Room Prefabricated Walk In Coldroom 4




Should you have any question, feel free to contact.You are all welcome at any time








Contact Details
Shenzhen Sino-Australia Refrigeration Equipment Co., Ltd.

Contact Person: Jason

Tel: 86-13480948557

Fax: 86-755-82209876

Send your inquiry directly to us (0 / 3000)